-
This is a handy little tool for scratching the joint surface between various parts of a piece of clay, for example, the joint between the handle and the cup. Instead of using a punch, this tool has 5 tips, making this operation easier and faster. The tips are made of stainless steel and the body is made in 3D printing with PLA. Dimensions: 7 x 0.7 cm -
Tempered stainless steel blade for ceramics. Made in Spain by a master knife maker. A very practical tool, not only for cutting the clay but also for retouching and for scraping the glaze on the cutting edge and on the curved part at the back, depending on the shape of the piece. Although it is made of stainless steel, it is recommended to clean it after use, since clay and water in prolonged contact can end up oxidizing the steel. Dimensions: 16x1,3cm -
Trimming tool. It is used to hold the clay piece on the bat when trimming. We have made several prototypes until we arrived at this design which is comfortable and easy to use. Its shape allows the hand to be placed in different positions according to the potter's preference. It is available in two sizes, a smaller one for cups and pieces with a smaller base and a bigger one for plates, etc. It consists of two parts joined by a steel bearing. Each piece is 3D printed in PLA, a plastic material that is ecological, renewable and biodegradable under certain temperature and humidity conditions. It is obtained from raw materials from nature, such as corn starch. Dimensions: Large: 6,4 x 1,8 cm Small: 4 x 1,5 cmReturn policy
-
Natural sponge of marine origin for use in ceramics replacing traditional synthetic sponges. It is a soft sponge but with a good consistency. Suitable for removing glaze on bisque pieces as well as for finishing and smoothing raw pieces. Approximate dimensions: Small: 5-6cm 2 pieces Medium: 7-8cm 1 piece Another small step to make your workshop more sustainable. Sponges are used constantly, and as they are used they wear out and release small particles that end up going down the drain and eventually into the sea. To prevent more microplastics from reaching the aquatic environment, switch to these natural, sustainably collected marine sponges. -
Winged ceramic sneaker in white. You can use it as a vase. Named after the Greek messenger god Hermes. It is made from several casts, one for each wing (which has been previously handbuildt) and another one for the sneaker, taken from a real one, which is why it has so many details and texture. The clay used is earthenware, fired at 1050º. If you want to personalize it with a drawing, phrase... do not hesitate to contact us. Because they are handmade, they are unique pieces, so they may have slight variations between them. Measurements: 28 x 9 cm; h: 14 cm.Return policy
-
Apron for potters made with a good quality 100% cotton fabric in 4 different colors. Designed in our workshop and made in Spain. It has the opening in the legs area to be able to turn comfortably with it. It is unisex and adapts to different sizes. Thanks to its size it covers well and with its two eyelets it can be better adjusted to the body according to the size of each one. The straps cross at the back for more comfort and not to bother the neck. It also has a pocket on the front. In our Instagram profile you can see a video explaining how to put it on. -
Handcrafted ceramic oil cruet with a simple and elegant bottle shape and white finish. It has a design that goes well in any type of kitchen, and a good size to hold it comfortably in your hand. This olive oil cruet is perfect to enjoy the best extra virgin olive oils. It is made of stoneware (paste fired at 1260º). The dispenser is made of steel and cork (it comes with a spare cork). It is dishwasher and microwave safe and suitable for food use. Because they are handmade, they are unique pieces, so there may be slight variations between them. Measurements: 8 x 13,5 cm (400ml) * Minimum order: 2 units. -
Born on the shores of the Mediterranean, this handmade ceramic bowl captures the swaying waves in its curves and the calm of the sea in its colours. Each shape echoes the swell of the waves, a shoreline frozen in time. Take a piece of the sea home with you.It is made on a stoneware wheel (clay fired at 1260º). It is dishwasher and microwave safe and suitable for food use. Because they are handmade, they are unique pieces, so they may have slight variations between them. Measurements: 24 x 7,5 cm. * Minimum order: 2 units. -
Treasure II is part of a series of small trays conceived as tiny containers for treasures. Each one is unique and proposes an intimate space meant to hold what we consider valuable: a small object, a memory, an amulet. In some pieces, a dried flower appears—often a thistle, collected from the landscape where I grew up—referencing simplicity, nature, and what endures. The act of treasuring thus shifts from material value to symbolic meaning. The irregular, organic edge—reminiscent of a mountain range—and the small central figure designed to hold the treasure are decorated with gold leaf. This intervention highlights the beauty of what we keep, of what is minimal and essential. Features Mixed media: slab built, acrylic, gilding 23x16x3cm, recycled ceramics 1125º, acrylic, gold leaf (23.75kt) -
Sold out
This elongated, oval vessel adopts the form of a familiar, everyday object to speak about time through stillness. Its surface is entirely worked by hand with fine lines that run across the body like a record of repeated gestures, slow rhythm, and sustained attention. Each mark refers to a patient process: the collection of sediments, waiting, the construction of the form, and the careful carving of the surface. The small opening, finished in gold, gathers and emphasizes this journey, marking the end of the gesture and preserving the memory of manual labor. Time is not conceived as a functional piece. It is an object for contemplation, inviting resistance to immediacy and encouraging the viewer to slow down. A simple form that defends slow processes and reminds us that value lies not in speed, but in the trace that remains in matter. Features Mixed media: roll, gilding 21x38cm, recycled ceramic 1125º, gold leaf (23.75kt) -
On purpouse emerges in dialogue with the piece Accidental, created simultaneously and marked by an unexpected break. In contrast, this sculpture affirms intention and conscious decision within the making process. Its simple, elongated form is built with clarity and continuity. The body rises in a contained manner, concentrating into a solid gold termination that provides weight, closure, and presence. Here, the material responds, allowing the initial idea to be sustained and carried forward without deviation. On purpouse speaks of possible control, of the will to construct, and of choice in the face of chance. A solid, silent piece defined not by accident, but by what is made with intention.Features
Mixed media: coils, acrylic, gilding 230x46cm, recycled ceramics 1125º, acrylic, gold leaf (23.75kt) -
This piece belongs to the early stages of the Renacidas project. Its rounded, slightly deformed shape retains a more spontaneous and playful character, visible in the use of polka dots as an intuitive gesture across the surface. It was first presented at the Maison & Objet fair in Paris. During that journey, the piece suffered a small damage and a crack appeared, the result of transport and handling. I chose to intervene by covering the wound with non-genuine gold leaf, a material used during this initial phase of the project. Rather than concealing the accident, the intervention integrates it into the body of the work and reinforces one of the core principles of Renacidas: to acknowledge the wound, accept it, and transform it into part of the piece’s identity. The work thus preserves the memory of its process, its journey, and the moment when the project was beginning to take shape. Features Mixed media: pinching, coils, gilding 17x15cm, recycled ceramics 1125º, gold leaf (copper) -
This ceramic bowl has an irregular rim with the interior finished in cream color and the exterior in dark matte gray. A modern and unique piece where the rim has beautiful stains in shades of green, gray and ocher due to the variation of the thickness of the glaze. It is lathe made in stoneware. It is dishwasher and microwave safe and suitable for food use. Because they are handmade, they are unique pieces, so they can present variations among them. Measurements: 14 x 7 cm * Minimum order: 2 units. -
Flowing Through Conversations is a bowl created using the pinch technique—an intimate process that begins with a small ball of clay and slowly expands through the gentle pressure of the fingers, from the inside outward. The form emerges organically, without a fully predetermined outcome. The piece was born during a visit to the studio. While we were talking, I allowed my hands to work freely, following the unhurried rhythm of the conversation. Shared time, words, and silences became inscribed in the material. The rim, marked by cracks and openings of varying sizes, draws a small landscape shaped by erosion and time. After the first firing, the piece was left to rest and be observed until the place where the gold leaf should appear revealed itself—highlighting its irregularities and holding the viewer’s gaze. Features Mixed media: pinching, acrylic, gilding 17x6cm, recycled ceramics 1125º, acrylic, gold leaf (23.75kt) -
This beautiful ceramic tray matches the flower bowls. It has an oval shape and a folded brim that resembles the undulating shapes of a flower. It is perfect to put appetizers, desserts or to use as a plate to eat on. Each ceramic piece is handmade, the rim is deformed by hand on each one, so no two are alike. It is made with a stoneware plate (clay fired at 1260º). It is dishwasher and microwave safe and food safe. Measurements: 31 x 14 x 2 cm * Minimum order: 2 units. -
These handmade bowls have a beautiful shape reminiscent of a flower. The matt white finish, the folds and the thin rim, result in an elegant, organic and moving piece. They are made on a wheel in stoneware and deformed one by one, which is why they are all different from each other. They are utilitarian but also decorative pieces. As centrepieces, they will dress your table in a unique way. They are made of stoneware fired at 1260º, dishwasher and microwave safe and food safe. They are available in two sizes. Sizes: - Small 15,5 x 7 cm. - Medium 17,5 x 8 cm * Minimum order: 2 units. -
This handmade plate is inspired by the dry fields of Malaga in summer. It has an irregular edge and a brush-applied earth-coloured finish, which makes this piece almost look like a canvas on which to serve food. In light, warm tones, it is a designer ceramic plate that goes well with very different colours: whites, browns, greens, blues... It is made with a stoneware plate and wheel (clay fired at 1260º). It is dishwasher and microwave safe and food safe. As they are handmade, they are unique pieces, so there will be variations between them. Measurements: 25 x 2 cm * Minimum order: 2 units. -
This handmade ceramic bowl has an interior finish in earth tones applied with a brush, making this piece almost resemble a canvas on which to serve food. The exterior is unglazed, giving it a rougher, more natural feel. In light, warm matte tones, it is a designer ceramic piece that combines with very different colours: whites, browns, greens, blues... It is inspired by the dry fields of Malaga in summer, full of earthy tones. It is made on a stoneware wheel (body fired at 1260º). It is dishwasher and microwave safe and food safe. As they are handmade, they are unique pieces, so there will be variations between them. Measurements: 26,5 x 7 cm * Minimum order: 2 units.
